Floor Tiles Cracking

When the concrete mix is too moist or hasn't been fully cured, this can happen. The water evaporates, loosening the concrete's top layer and causing it to peel away. Although concrete spalling is unsightly, the slab is likely to be in good condition.

What causes cracks in floor tiles?

Cracked tiles are frequently the consequence of underlying problems, the most common of which is improper installation. Extreme temperature changes, fissures in the substrate (the area on which the tile is put), supporting too much weight, or anything as simple as a heavy item being dumped on them could all be factors.

What should I place under my floor tiles to keep them from cracking?

Between your tile and the subfloor, check sure an anti-fracture membrane has been installed. Anti-fracture membranes absorb breaking energy and disperse it over a broader region of the floor. This distributes the pressure evenly across the tiles and prevents breaking.

When should I be concerned about cracks in my basement floor?

Cracks with heaving are indicators of a more serious issue that must be treated. When a basement floor fracture occurs in conjunction with heaving, it's cause for alarm. The expansion of the earth beneath the basement floor is indicated by heaving. Heaving is more common in locations where the soil is clay.

What causes water to rise through a concrete floor?

When it rains, water soaks into the ground until it becomes too saturated to absorb any more. Water will rise to the surface at this point, creating hydrostatic pressure to build up on your foundation and basement floors, resulting in water seepage into your home.

Is it possible for water to enter the basement through gaps in the floor?

Water seeps into your basement floor through the floor/wall joint or gaps caused by the foundation/floor sinking over time. To seal this joint, use hydraulic cement.